The Spring Festival has just finished, the temperature begins to suddenly a high, and suddenly, the up and down, it is a bit “enjoy”. The flying, dust and temperature differences in the car, so that the focus is on the automotive air conditioning system, so Xiaobian will take this “Fenghua Snow Moon” to the whole. There will then be two phases to check and maintain the automotive air conditioning system.
1. One sentence overview auto air conditioning system
The automotive air conditioning system is a device that realizes cooling, heating, ventilation, and air purification in the vehicle. It can provide a comfortable ride environment for ride, reducing the driver’s fatigue strength and improve driving safety. The air conditioning device has become one of the signs that measures whether the car function is complete.
2. Engine room air conditioning device
1. Check the air conditioner compressor and the engine and the crank leather plate mounting in the consent plane position.
2. Check the air conditioner compressor and the engine to connect the belt, the surface should be complete, no deprimatic aging, no crackdown tooth, no water and oil.
3. Check that the air conditioner compressor belt is well installed, and the air conditioner compressor belt is tightened using 50 n force. The multi-wedged belt offset is 5-10 mm.
4. Open the light, visually detect the surface of the air conditioner pipeline should be intact, no damage or discount.
5. Visually Check the condenser installation position, heat sink has no deformation or debris blockage.
6. The heat dissipation electromagnetic fan wire is connected well.
Sign in. Check the air-conditioned drainage exit without foreign matter or dust clogging.
8. Check the air conditioner filter.
1) Remove the rain brush and drop the sink baffle.
2) Remove the air conditioner filter protective filter and remove the divided filter filter.
3) Check if the air conditioner filter is dirty, slightly dirty, and use high-speed air to blow clean. If there is obvious dirty blockage, replace it.
4) After cleaning and replacing, install the reset.
9. Install the protective filter and the wiper drop sink baffle.
3. This maintenance data model: Peugeot 308 2013 style
Maintenance location:
Minhang District Lianhua Road, Caobao Road, Yongle Appliances