– Foreword
In order to protect the mobile phone, many people have habits using mobile phone cases. But your mobile phone case is not a roadside booth, that is, Taobao explosion, although the price is cheap, it is easy to hit. For Xiaobian’s fashion tide, it is determined that it is unacceptable. Today, I made a 3D-printed mobile phone case, but it not only appeared very fashionable, but it didn’t make you.
– Unique, in this family
3DFUN is a technology company that prints living with 3D printing, users can customize their favorite mobile phone shells through 3DFUN, and realize the real private privateCustomizeJust need four: 1 Select the phone model, style private customization; 2 designer digital modeling; 33D printing; 4 package delivery. This is the iphonex gear model.
Be
If you want to get a dog food, you can also give your own mobile phone shell style to 3DFun to let your IDEA landing, unique couple models can make you extra points in his / her heart.
– Environmentally-friendly and non-toxic, lightweight
According to the detection of Tsinghua University Construction Environment Testing Center, it has been found that the plasticizer and brighteners are added during the production process; the native leather tanning is required to add a benzene preparation and glue, and there will be formaldehyde. Therefore, at normal temperatures, many mobile shells will release toxic substances. Among them, plastic-shell-shell-shell-shell release is the highest, the leather-made mobile phone shell release formaldehyde content is 0.25 mg / cubic meters, which is twice as much as the standard specified by indoor air national standards. Also, at high temperatures, the quality of the poison release of the mobile phone case will be higher! Scared this baby quickly throws all the plastic shells and leather mobile phone shells into the trash.
Fortunately, the mobile phone shell of 3DFUN is used in Germany imported nylon PA12 aviation materials. It is not only high in strength, but the key is environmentally friendly, and it is not afraid of long-term use.
Have to say, the texture of this mobile phone case is really relatively light, which is much smaller than the general clinker shell, and if you have no things in your hand.
The screen of the phone shell is 1mm on the side of the screen, and the phone can be wrapped in the phone, and the protection screen is not damaged. In addition, the anti-fall capabilities of this mobile phone case are better than the hard ABS mobile phone shell on the market.
-Good heat dissipation
Ordinary mobile phone shells not only contain formaldehyde, erod your health, but also lower the service life of your mobile phone. This is because the mobile phone use is long, the phone temperature will increase, if the conventional mobile phone case is used, the closed environment will naturally make the phone temperature higher. If you don’t have a mobile phone case, the service life of your mobile phone can generally reach around three years. If you use your mobile phone case, your mobile life is usually only for about two years.
Be
In addition to the position of the mobile phone button, this mobile phone case has opened a lot of breathable holes in the back of the mobile phone case. The back of the mobile phone is not only beautiful, but also helps mobile breathable. Heat dissipation. It can be said that this is a mobile phone case that will breathe.
Be
– can play mobile phone shell
In addition, the mechanical gear on the back of this phone case can not be just a good look. With your finger on the gear, each mechanical gear on the phone case begins to rotate, quite interesting. The work is tired, and it can play a role in playing with a break.
Be
-Summarize
由于定制款3D打印手机壳每一款都要单独建模，所以通常都价格不菲，像这样同类材质的3D打印手机壳，基本都要300元以上。此次3Dfun的私人Customize款在苏宁众筹期间最低价格仅为半价128元，这么大的活动力度，笔者表示很心动。好了，不说了，我要拿着我的3D打印款手机壳出去装逼了。
Be