The loose and lazy knitted top I shared with you today can actually be worn as a dress, but it still feels more comfortable to match with pants
Let’s take a look at the clothes first
Clean white, giving a refreshing feeling. In fact, the simpler the tone, the more it can show the design of the clothes.
XL code crop to share with everyone
The front and rear pieces are divided above the upper lumbar segment, the back piece is a green line, and the front piece is a red line.
Sleeve cage depth calculation formula: B/4+1CM
THE FRONT PIECE IS A 3CM CHEST PROVINCE, AND THE FRONT PIECE CAN BE TRANSFERRED BY THE PROVINCE AFTER THE FRONT PIECE IS DIVIDED, AND THE THORACIC PROVINCE CAN BE TRANSFERRED TO THE DIVISION LINE OF THE FRONT PIECE.
The clothes are short front and long back, with a rounded treatment at the hem and a small gusset at the front and rear junctions.
THE CHEST SIZE OF THE READY-TO-WEAR IN THE CROP IS 114CM, WHICH IS SUITABLE FOR BODY TYPES WITHIN 100 OF THE CLEAR
IF OTHER SIZES ARE REQUIRED, THE PLATE CAN BE PUSHED ACCORDING TO THE GEAR DIFFERENCE OF CIRCUMFERENCE 4CM, LENGTH 2CM, SLEEVELENGTH 1CM.
Crop the drawing base
The complete part after splitting the copy is cut after adding different seam edges according to different sewing processes
Explanation of clothing production process and sewing process
The fabric is selected, the fabric of the sample is a combination of knitted fabric and washing cotton, and the cuffs are threaded fabric
If you find it troublesome to match fabrics, you can use all knitted fabrics. The effect is also good
Be sure to shrink the fabric before cutting
Draw the paper pattern according to the above crop drawing, and add and place the seam according to the sewing process.
The pattern is typeset parallel to the edge of the cloth and then cut
If you sew with woven fabric, add a 1 cm seam, if you use knitted fabric, add 0.8CM seam.
The split corners of the front and rear pieces must be equipped with alignment to prevent deformation during stitching.
After cutting, start stitching
The lower body of the front piece is first folded and sewn in half and then flattened with the upper half.
The lower body of the back piece is shrunk and folded to fit the upper body
Split front and back side seams, shoulder seams, bottom seams, stitched neckline
The neckline is striped with a horizontal strip without seams on one side and seam on the other. After the neckline is stitched, 0.6CM open thread is pressed on the large body, and the neckline will naturally curl without any treatment, and the collar effect is done below
Neckline effect
Cuff panels threaded, no thread can be replaced with knitted fabric. THE WIDTH IS GREATER THAN THE LENGTH OF THE NET BODY PLUS 2 CM OF LOOSENESS
Cuff effect
Splicing gussetes at the front and rear joints of the hem side seams. Gusseted corners can be folded in half with double layers
THE FRONT AND REAR HEM HEM CAN BE ROLLED UP TO 0.5CM
Hem curl effect
Well, that’s it for today’s sharing
If you like it, you can try it, and if you don’t understand, you can leave a message or private message in the comment area
Welcome to like and forward to show encouragement, thank you!!!
Loose and comfortable large-size literary fan dress, make your own one and wear it out, everyone says that it looks good and thin
Crop the drawing base