Since UBRAS has successfully made a circle with a comfortable sizeless underwear, many brands have followed suit. Recommend this period in this issue
Twilight temptation without trace cloud underwear
The fabric has sufficient elasticity, comfortable and serving, and the price is only half of the big name.
Cage assessor summarizes
This underwear launched by Twilight is only half of the big -name -without size underwear, but it also uses non -trace cutting throughout the body, the fabric is flat, more fits the shape, and there is no trace of the inside.
Its side comparison and shoulder straps are widely designed, gently wrap the chest, and at the same time disperse the shoulder and neck pressure, bringing a comfortable and unsophisticated dressing experience. In addition, the cotton pads of the underwear are full of three -dimensional, and the elastic fabrics are supported upwards, which is sufficient for the little breast. And it is convenient to remove it. Repeated rubbing can be recovered quickly, and the resistance to deformation is strong.
Observe carefully that the cotton pads are densely covered with small air holes, although it has the advantages of accelerating breathable and promoting sweating, but the disadvantage of the beauty is that the two trials feedback to wear in a sweltering environment, and it will still produce a sticky feeling when sweating.
Sample screening and evaluation process
The underwear uses elastic ice fabrics, with smooth touch, and it is not easy to deform left and right. The bottom of the underwear is wide and the support is strong, suitable for multiple bust girls.
The underwear is a removable sponge pad. The removal is easy. After repeated rubbing, the cotton pad can quickly restore the original shape. It can be seen that the elasticity is sufficient and the daily wear is not easy to deform. Although the cotton pad is convenient, in order to maintain a full shape, it needs to be removed when washing, washed separately from the underwear, and dried it in front of it to prevent deformation.
The use of non -trace tailoring process makes the fabric flat, and the inside is embarrassing to avoid retention. Give the side amplitude to the chest gently, modify the fat on both sides, and the skin force area increases, and the upper body of the underwear is not easy to be tight.
Compared with traditional adjustable shoulder straps, the shoulder strap of this underwear adopts a three -dimensional tailoring design, and uses high -temperature hot melting glue bonding to reduce sewing exposure and comfortable. The wide shoulder strap fit the natural outline of the shoulder and neck, which is easy to disperse pressure, and at the same time provides effective support. Even a full -bust lady has no pressure.
*There is no actual trial picture of personal clothes. The evaluator regularly returns to the trial person in a month to record the wearing experience
Raise the ball test
1. During the phenomenon, the phenomenon of simulation of clothes is mainly simulated. During the daily wear, the phenomenon of hair balls appeared on the surface of the clothing due to continuous friction.
2. Experimental process: Take 100 square centimeters of round samples from the tested clothing, load the sample on the yg502 circular trajectory, refer to the national standard GB/T4802.1 to select the corresponding method and parameters, and use the circular trajectory with the circular trajectory Sports performs friction experiments. After obtaining the experimental sample, compare it in the standard rating box with the original and standard photos, respectively, and evaluate the grade 1-5 of the hair/kick level, the worst level 1 (the most serious kick), and the best level 5 is best. (There is no change on the surface).
Note: In view of the industry standards of some categories in the national standard, there is no mandatory requirement for the raising level of fabrics. The data obtained by this experiment is for reference only.
Conclusion: After measured, there was no signs of hair and ball on the surface after the underwear friction.
Dry to dry, wet friction color accuracy test
1. Rubbing coloring the color fastness is one of the color fastness test. This experiment uses Y571D friction color fastness tester to simulate the daily use of clothing, which may occur.
2. Experimental process: Fix a sample of about 15cm*20cm on the friction tester platform. After setting the corresponding parameters, the standard friction cloth with a dry and 95%-100%humidity is performed. Dry/wet experimental sample.
3. Experimental samples use gray sample cards that comply with GB/T251, ISO 105/A03 standards, and compare level 1-5 under the standard light source to the color light box. Level 1 is the worst (the most severe color), and level 5 is the best (there is no color at all).
Conclusion: After measured, the dryness of this underwear and wet rubbing color reaches level 5, the friction cloth surface is not stained, and the performance is better. Usually wearing it is not easy to fade.
Hand washing color test
1. Soak the clothes for about 15 minutes, simulate daily scrubbing, and observe whether the clothes have faded.
2. Add tap water to the washbasin, put the clothes and rub the clothes a few times, soak it for about 15 minutes, take out the clothes and observe the color of the water.
Conclusion: After fully soaking for about 15 minutes, the underwear did not fade, and the water washing performance was excellent. It is recommended to separate the sponge from the underwear when washing, and then dry it.
1. The breathability determines the comfort of the clothing to a certain extent. In a relatively fixed environment, this experiment is at the same time simulated gas reached through the height of the clothes.
2. Choose three clothes of different thickness and detect them by third -party authoritative agencies. The breathability is: 183mm/s (good), 857mm/s (excellent), and 2136mm/s (excellent). Take these three different levels of samples, conduct the above small experiments test, and make three different photos of different breathable gas heights, which is convenient for experiments to compare instructions.
Note: The interpretation of the breathability of clothing samples, such as 2136mm/s, is 100 square centimeters of air pressure, the average rate of the gas through the 20 -square centimeter fabric sample is 2136 mm per second.
The assessor puts the tested clothing on the humidifier and flattened, turns on the power, and observes and records the gas in the same time (about 3-6 seconds) through the height of the clothing. The degree of breathability of clothing is roughly breathable.
Conclusion: After experimental testing, the highest place can reach 4cm when the gas is in the underwear. It can be seen that the permeability performance is excellent and the upper body is more comfortable.
If the breathable height> 8cm, the breathability is excellent;
If the breathable height is 3-8cm, the breathability is excellent;
If the breathability height is 1.5-3cm, the breathability is good;
If the breathability height is <1.5cm, the breathability is average.
(The above -mentioned non -executing criteria for general, good, excellent, and excellent word descriptions. This is a description based on the guidance of professional testing agencies to intuitively reflect the breathable effect. In view of the national execution standards of some categories, fabrics are paid to fabrics. The breathability does not require compulsory testing requirements. The breathability data obtained by this experiment is for reference only.)
Twilight temptation without trace cloud underwear