Elephants have always been a frequent visitor to the artisanal world as templates, and various elephant paintings and clay elephants have emerged in an endless stream.
But to make a realistic elephant, it is not so simple, you must have a high ability to shape,
But everything has absolutes, in Teacher Xiaoli, only a few pieces of cardboard,
Some simple materials such as foam cotton, paper tubes and other simple materials can help you make a three-dimensional realistic elephant.
Spring paper elephant mask
Be strong like an elephant and protect you!
Mom, I will eat well, grow strong like an elephant, and protect you~
Drawing the head of an elephant on cardboard is actually mainly to draw a circle~
Prepare a piece of A4 paper, cut into long cardboard paper one by one, the size should be the same ~
Then the two pieces of cardboard were folded staggered together, and in order to make everyone see more clearly, two blue cardboards were not used to do it~
Such a fun elephant mask, don’t miss it, hurry up and play with children~
Paper cup long-nosed elephant
Let’s take a look at what a long-nosed elephant looks like:
Preparation materials: paper cups, yellow corrugated paper, gray and yellow sponge paper
(or cardboard), gray paint, white crayons, gouache, utility knives, scissors, glue.
Production steps: Place the paper cup upside down on the table and apply gray pigment to the surface of the paper cup with chalk
Cut out the outer outline of the elephant’s ear with gray cardboard and the slightly smaller inner outline of the ear with yellow cardboard.
Glue the inner contour to the appropriate position of the outer contour to complete the elephant’s ears.
Cut out elephant eyes with black cardboard, ivory from white cardboard, and trunk from yellow corrugated paper.
Insert the elephant’s ears at each end of the incision at the bottom of the cup. Place the eyes with glue
Stick the trunk to the wall of the cup, and then insert the tusks at the ends of the trunk, and the elephant is finished.
Elephant greeting card
Preparation materials: cardboard, yarn, embosser, glue, scissors
Production steps: Prepare the elephant template
Cut the elephant and paste it
Arrange the yarn and attach it
Embosser presses round or scissors cut circle
Paste the balloon
Finish the work
Origami roll-nosed elephant toy
Preparation materials: 2 sheets of blue square colored paper, 1 piece of white paper, 1 black watercolor pen,
Red colored pencil, a straw for drinking, solid glue, scissors, double-sided tape.
Production steps: Fold the square colored paper in half into a triangle.
Use scissors to cut two triangles from the folded line, and then fold the top corner inward to form the figure.
Take another piece of blue colored paper and cut out a rectangular strip of paper.
Glue the straw to the position shown in the figure.
Then attach the blue strip you just cut to the top of the straw.
Then glue another corner triangle to the top.
Fold the corners on both sides downward, and the shape of the elephant’s ears will come out~
Use white paper to cut out the location of the elephant’s eyes and tusks in the picture.
Use black watercolor to draw the elephant’s eyes and the lines on the nose.
Use red colored lead to add some color to the ears, and then roll up the elephant’s nose back, and our elephant is ready~
New list editor
Preparation materials: 1 utility knife, 1 scissors, 1 solid glue,
4 sheets of colored A4 paper, 1 sheet of white A4 paper, 2 plastic eyes
Preparation materials: four colors of nonwovens, glue, transparent glue, scissors, chopsticks, cardboard
Production steps: Use three colors of unwoven cloth respectively, and cut out the corresponding pattern according to the example below
Stick the black cochlea to the blue ears and attach both ears to the back of the rounded head
Turn the attached head over and attach the red body
Put on black shorts with two arms and feet
Turn the pasted elephant over, attach the eyes, and attach the wrinkles on the nose and nose
Cut out the cardboard out of the shape underneath and paste it behind the elephant’s body to secure
Cut out the cardboard out of the shape underneath and paste it on the back to reinforce the body
On the back of the body, hold the chopsticks tightly with transparent glue
Cute elephant done! Show it to your friends
Elephant car toy
Preparation materials: waste cardboard, paint, colored pens, wool, scissors, wheels, bamboo skewers, beads, glue guns
Black cardboard elephant
Preparation materials: black and white cardboard, pencils, scissors, glue, ruler
Production steps: first fold a piece of black cardboard up and down in half,
After folding it in half, draw an elephant on it (draw with white pencil)
After the painting elephant looks like this, don’t forget the tail
Reduce the elephant and the beard can stand upright on the plane:
And then we glued the inside of the cut elephant.
Remember that glue is not needed below the feet so that the elephant can stand up:
Draw the ears of an elephant on black cardboard, you can try to draw them yourself according to the picture below,
If you are concerned about asymmetry, you can draw half of the ear cut out on a cardboard folded in half
At the elephant’s head, which is about the ear, cut a small opening with scissors and insert the ear of the previous step into the small opening.
Draw one side of the ivory on a white paper folded in half, and cut it,
As in the previous step, cut the small mouth at the position of the elephant mouth and insert the ivory
Cut out 2 small round holes in the white cardboard for eyes
Cut 2 black circles smaller than the white circles on the black cardboard and fix them with glue
Finally, a smaller white circle is added so that the elephant’s eyes are ready
Finally, these bright eyes were put on the elephant, and the whole craft was done
Blue cardboard elephant
Preparation materials: A4 blue cardboard, pencils, scissors, glue, ruler, stapler
Production steps: First draw the elephant’s head on blue cardboard
After cutting the elephant, cut a small hole in the elephant’s head and staple both sides with a staplapper
On another blue folded cardboard, first draw the body of the elephant, as shown below:
Cut off the elephant body mentioned above and draw it with a staplapper
The dotted position of the head and tail is bound with a stapler
Draw an elephant’s tail on blue cardboard and cut it out
First fix the head to the body with a stapler
Attach the little tail with glue
Finally, if you want to make elephants more realistic, buy handmade
The eyes are decorated with gold metal cardboard:
Finally, you can cut the petals on different colored cardboard and paste them
On elephants, such an elephant from Thailand is made to le
Roll paper tube elephant
Preparation materials: toilet paper tubes, false eyes, paints, scissors, glue, pencils, utility knives,
Production steps: First use a pen to draw the position of the elephant’s ears on a toilet paper tube
Then cut the rim of the elephant’s ear with a utility knife
Cut out a long strip with a toilet paper tube
Glue the long strip between the ears as the elephant’s nose
Then paint the color with pink paint
Finally, glue a large and a small prosthetic eye, and the elephant is ready
Plastic gloves elephant storage bag
Change the unused rubber gloves into a cute bag.
How did rubber gloves change? If you want to know, check out the tutorial below!
This bag has never been seen before! It’s not pretty, but it’s definitely very characterful. Because no one would think of transforming a rubber glove into a bag that can hold things. It’s okay to put some pens or small things in the bag. Let’s see how it is made!
Preparation materials: rubber gloves, scissors, pen, needle and thread, thick rope.
Production steps: glue guns are also indispensable, be prepared.
Trim off both finger covers of the glove as shown and cut the index finger glove shorter.
The cut below the cut line in the picture should be cut off. Then cut out the cut circle.
Suture the finger area with needle and thread and fold the upper end of the glove. Waste rubber gloves are turned into finger bags.
Place the cut disc on the top of the glove.
Use needle and thread to stitch the disc with the glove.
Thread the thick rope through the side of the glove and stitch it together, just like in the picture.
Use a pen to draw the eyes and mouth on the gloves.
When you’re done, you can put a pen in the finger pocket that your rubber gloves have changed.
Creative roll paper tube elephant
Cute elephant, let’s do it together.
Find the paper tube as shown in the picture.
As shown in the picture, use cardboard to make legs.
Make the head and ears as shown in the picture.
Make ivory as pictured.
Make a tail as shown in the picture. As shown in the picture to make eyes, the cute elephant is done, handsome!